TRY TARASEC

Get access to TaraSec

Connect from a computer or an Android phone. Join through WireGuard, connect to an existing TaraSec hotspot, or install your own hotspot to provide access and test TaraSec on your own network.

Choose how to gain access

  • Join through WireGuard: connect a computer or phone to the TaraSec test network using an individual configuration.
  • Use an existing hotspot: connect to a TaraSec hotspot or a network with access to the test nodes, then follow the demonstration instructions.
  • Install your own hotspot: run TaraSec on a suitable Linux computer and connect your test devices through it. See hotspot setup below.

WireGuard registration

For VPN access, register your name and email to receive an individual WireGuard QR code. Existing testers should use their assigned configuration. The current registration provides one configuration per email address; contact TaraSec if you need access for another device.

Get a WireGuard QR code

Each device needs its own WireGuard key and VPN address. Request a separate configuration for a laptop if your current one is already used by your phone. Installing the Android app does not provide VPN access by itself.

Install your own TaraSec hotspot

A hotspot gives you a TaraSec gateway for your own network and a place to test with connected devices. A suitable Linux computer, such as an Ubuntu machine, is the current practical platform.

  1. Read the hotspot setup options and use the TaraSec installation resources to plan and configure your Linux gateway. Public step-by-step hotspot guidance is still being completed; contact TaraSec for setup assistance.
  2. Once the hotspot is configured and connected to the required TaraSec services, connect your computer or phone to its local network.
  3. Open the demonstration instructions and choose the hotspot as your gateway where requested. Each demonstration explains which nodes and routes it needs.

The hotspot provides the network connection for devices attached to it. Those devices do not need individual WireGuard QR codes merely to use that local connection; the gateway still needs its own configured connectivity to the relevant TaraSec services.

Connect a computer with WireGuard

You can use browser-based TaraSec demonstrations from a computer without the Android app.

  1. Install the WireGuard client for your operating system.
  2. If you received a .conf file, import it into WireGuard. If you received only a QR image, decode it locally as described below.
  3. Activate the tunnel, then open the demonstrations page and choose a browser demonstration. Demos labelled for the app require the Android app.

Turn a QR image into a .conf file on Linux

Download your assigned QR image to a private folder as tarasec-qr.png. On Ubuntu or Debian, run the following on your laptop from that folder. The decoder writes the configuration directly to a file without printing the private key.

clear
# Laptop — Ubuntu / Debian
sudo apt update
sudo apt install wireguard zbar-tools
umask 077
zbarimg --quiet --raw tarasec-qr.png > tarasec.conf
chmod 600 tarasec.conf

Confirm that decoding succeeded before importing the file. A normal WireGuard configuration contains [Interface] and [Peer] sections. If decoding fails or produces an empty file, stop and request a configuration file from TaraSec.

Import tarasec.conf using your desktop's WireGuard or network settings. Alternatively, connect from the terminal:

clear
# Laptop — connect
sudo install -m 600 tarasec.conf /etc/wireguard/tarasec.conf
sudo wg-quick up tarasec
sudo wg show tarasec

To disconnect, run sudo wg-quick down tarasec. If startup reports a missing resolvconf command, install your distribution's resolvconf package and try again.

Windows and macOS

Import your individual .conf file into the WireGuard client and activate it. If you have only a QR image and no trusted local decoder, ask TaraSec for the corresponding configuration file.

The QR image and .conf file contain your private key. Keep both private, avoid online QR conversion sites, and remove unnecessary copies after import. Contact TaraSec to revoke or replace a configuration if it is exposed.

Optional: use the Android app

The app provides gateway status, demonstrations and approved management functions. Connect to a TaraSec network directly, or install WireGuard on your phone, scan your phone's individual QR code and activate the tunnel.

The Android app is currently distributed through a Google Play closed test. Your Google account must be added to the tester list before you can join and install it.

Network access, Google Play tester membership and gateway manager approval are separate. Management privileges require the gateway's approval process.

Connected? Try a demonstration.

Choose a browser or app demonstration and follow its setup instructions.

Explore demonstrations